776087-1

• Datasheet

• PCN - 01-Aug-2018 - New Capacity Molds, Additional Automated Assembly Lines And Packaging Change

• PCN - 15-Feb-2017 - Te Manufacturing Will Be Changing The Current Flange Seal Material

• PCN - 30-Jun-2016 - Te Will Be Changing The Material Currently Used On The Dispense In Place (Dip) Seal

• PCN - 16-Jan-2017 - 23 POSITION AMPSEAL HEADER - PRODUCT IMPROVEMENT

• PCN - 16-Jan-2017 - 23 POSITION AMPSEAL HEADER - PRODUCT IMPROVEMENT

• PCN - 11-Dec-2020 - Document Clarification

• PCN - 05-Apr-2015 - UPDATING THE PRINT WITH NEW MOUNTING SCREW TORQUE VALUE

• PCN - 04-Jun-2016 - Changing The Recommended Mounting Screw Size From #4 (3.0mm) To #3 (2.50mm)

• PCN - 31-May-2018 - A Duplication Of The Flange Seal Material Dispensing Equipment At The TE Manufacturing Plant

• PCN - 26-Nov-2018 - To Improve The Transit Time Of Products To Our Mutual End Customers

• PCN - 29-Oct-2018 - TE Connectivity Products - Distribution Center Change From WCDC, Ontario, CA (USA) To HLDC, Hermosil

• PCN - 15-Feb-2017 - Te Manufacturing Will Be Changing The Current Flange Seal Material

• PCN - 11-Mar-2014 - CHANGING ALL DIMENSIONS THAT ARE CONTROLLED BY MOLDING TO REFERENCE DIMENSIONS

• PCN - 09-Mar-2022 - TE Connectivity Is Adding A New Capacity Seal Dispensing Line

• PCN - 21-Jun-2021 - TE CONNECTIVITY IS MAKING A CHANGE TO THE MOUNTING HOLE GEOMETRY ON ALL 23-POSITION

• PCN - 30-Sep-2019 - TE CONNECTIVITY WILL BE MOVING A MOLDING MODULE

• PCN - 01-Oct-2021 - Manufacturing Move Within The Same Plant

• PCN - 30-Jun-2016 - Te Will Be Changing The Material Currently Used On The Dispense In Place (Dip) Seal

• PCN - 11-Mar-2015 - CHANGING OF CUSTOMER DRAWING PCB LAYOUT HEADER PIN THRU HOLE AT DIA1.38+/-0.10 TO DIA1.75+/-0.10

• PCN - 18-Mar-2020 - TE Connectivity Is Making Change To Ampseal Header Assembly Customer Drawing Notes And Dimensions

• PCN - 09-May-2022 - TOOL DUPLICATION

• PCN - 28-Jun-2019 - PURPOSE IS ADVANCED NOTIFICATION OF MANUFACTURING CHANGES RELATED TO AMPSEAL RIGHT ANGLE HEADERS

• PCN - 31-Jan-2019 - This PCN Is An Addendum To Previous Ampseal PCN Numbers E-18-008460

• PCN - 13-Apr-2022 - Process Change Notification

• PCN - 23-Apr-2015 - CUSTOMER DRAWING PCB LAYOUT SHOWS THE HEADER PIN THRU HOLE AT DIA1.38+/-0.10

• PCN - 24-May-2010 - Product Change Of 35 Posn Ampseal Header Assembly

• PCN - 27-Apr-2016 - CHANGING THE RECOMMENDED MOUNTING SCREW SIZE FROM #4 (3.0MM) TO #3 (2.50MM)

• PCN - 02-Sep-2019 - Products Shipping Location Change

• Product Specification - AMPSEAL Header Flange Seal Test Procedure

• Agency Approval Document - AMPSEAL Connector

• Agency Approval Document - AMPSEAL Connector - Class 1

• Product Specification - AMPSEAL* Connectors

• Product Specification - AMPSEAL Automotive Plug Connector and Header Assembly

• Product Drawing - HEADER ASSEMBLY, 23 POSITION, RIGHT ANGLE, AMPSEAL

• 3D PDF

• EE ToolBox
  

•