Introducing the new SBS®X-75A Sealed Waterproof Connector Series

In today’s environments where high power, signaling and waterproof protection are required, Anderson Power Products has you protected. 

The SBS®X-75A sealed waterproof connectors come in a multiple of configuration offerings with up to a maximum of 140A of power and the durability of up to 5,000 mating cycles. Positive metal latches help safeguard against accidental disconnects that may be caused by vibration, while the built-in cable clamp allows for strain relief on wires. The compact sleek high-power design of these environmentally rugged connectors makes them ideal for outdoor applications. The IP68 weatherproof rating ensures that the connector will be free of water for full protection up to 30 minutes at 6 feet in the mated conditions, or with the use of covers in unmated condition.

FEATURES: Power & Signals or Ground, Rated to IP68 for Ingress Protection, Positive Latching to secure connection for vibration applications,Operating temperatures -20°C - 105°C, and 5,000 Mating cycles.

SBS® Connector Series – Standard Housings (Non-sealed)

The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits. This is of particular importance in applications where DC voltages exceed 30 volts and can be health threatening.

SBS Mini connectors are the smallest DC power connectors available in the SBS series rated up to 52 amps. Each housing securely holds two power contacts designed with flat-wiping technology to enable hot swapping capabilities to 45 amps at 72 volts on DC circuits. 

SBS®50, SBS®75X and SBS®75G are available in Wire-to-wire and wire-to-board configurations both provide power contacts rated up to 110 amps. The SBS75X offers up to 4 mate-last break-first auxiliary power / signal contacts rated up to 20 amps. The SBS75G features a third first-mate last-break ground or power contact. All contact positions are rated for circuit interruption (hot plugging).

FEATURES: Touch Safe Interface,Can safely be used in through panel applications,Minimizes potential contact with live circuits per IEC 60950, Wire-to-Wire and Wire-to-Board Configurations, Allows one connector to meet multiple needs, Ground or Auxiliary Positions Integrated into the One Piece Housing, Meets all connection requirements in one compact connector housing.

Chemical Resistant Housings (Non-sealed)

The Chemical Resistant (CR) line of connectors were developed for customers whose applications require durability against environmental factors that commonly degrade Polycarbonate plastics. The Polycarbonate/PBT blended material offers improved resistance to hydrocarbons and solvents, as well as, an extended temperature range to -40°C. Ideal for a variety of industries including Personal Mobility, Automotive, Industrial, and more.  Housings offer a genderless style that is mechanically keyed to prevent cross mating with hot plug capabilities. These products mate with standard housings and accept the same range of contacts.

FEATURES: Same Design as Standard Connectors with Broader Operating Temperature Range,Rated to -40°C,Fully intermateable with standard product, Superior Chemical Resistance, Housing material is highly resistant to,hydrocarbons and solvents commonly used in transportation applications,Prevents material degradation from prolonged sunlight exposure,Durable Performance,Resists damage from rough treatment,Marked for Easy Identification of Material, and Chemical resistant housings are marked with a “P” for PBT.